Showing posts with label router. Show all posts
Showing posts with label router. Show all posts

Tuesday, January 31, 2012

Solar powered router

My completed solar powered WAP. 12 solar charged PSU, solid lead-acid 12v 7.2mAh battery, Sunforce charge controller, and two Sunforce 1.8w panels.


The next step is to mount the components on a mast. I am planning on a longevity and durability test in the near future.

Tuesday, January 10, 2012

Radio Hardware Overview

Here is a selection of the hardware I am using for the radio portions. The units I chose to use in the test role were upgraded with headsinks and fans. The fan is from a Pentium III slot 1 processor from a very old server. A bit of weather stripping to seal it off and a 3-pin fan connector with a 100ohm resistor soldered to the motherboard supply. With the modifications, I can run each of the routers at full Tx power, 251mw, without any reliability issues. Mild overclocks are tolerated at full Tx power, but I haven't had a chance to do any real overclocking.

Linksys WRT54G version 2, dd-wrt version v24 sp2 mega build.




Linksys WRT54GS version 6, dd-wrt v24 sp2 micro build, with hotspot.



Linksys WRT54GS version 2, dd-wrt v24 sp2

Sector Antenna Build version 1

The goal here was to replicate the work of others to create a low cost wifi sector antenna from off the shelf components. In many places in the United States do not have access to public wireless internet services. Maybe my interest in the subject will help others here in the States' to jump on the municipal public wifi bandwagon as the rest of the world has. Credit to Erwin Gijzen and Dragoslav Dobricic for their designs. More links to others projects below. 

This is my first attempt. I used material that was easily available. The total build time was 8 hours, but I'm sure it can be cut down significantly with better fabrication techniques. I will show details on my next build.

Length: 455mm, width: 62mm

The balun, 40.7mm length

The n-female connector

Standard RG-58U. This is all I had at the moment. Use LMR-400 if possible.




The Finished product is amazing. I have full wireless signal in an approximately 130 degree arc at 600 feet from the antenna, using the Cisco iphone app, CIST. I had on average 38Mbps at 300 feet and 26Mbps at 600 feet. The Antenna was mounted at 20 feet above the ground at a 10% downward tilt. Here is the test setup.  Linksys WRT-54GS v6 with dd-wrt v24 SP2 micro build firmware with hot-spot mode. I used b/g mode with auto channel selection. The transmit power was set to 125mw. (Note: The router antenna selected is the one closest to the power. This means there is a length of lmr-195 ~17cm long between the motherboard and the connector. I chose this method to test the low end of the performance envelope first.)



Links:
http://pe2er.nl/wifisector/ - Erwin Gijzen's homepage
http://www.digdice.com/12dbi-180degree-sector-wifi-antenna/ - estqwerty's digdice wireless (awesome blog)